Create a new article
Write your page title here:
We currently have 33 articles on Ballmedia. Type your article name above or create one of the articles listed here!


    Documentation for this module may be created at Module:UserLinks/config/doc

    --                            UserLinks configuration                         --
    -- This module provides configuration and localisation messages for           --
    -- [[Module:UserLinks]]. See the comments in the code below for explanations  --
    -- of what each message does.                                                 --
    local cfg = {} -- Don't edit this line.
    --                                Display values                              --
    -- These messages are the display values for the user links. These are the    --
    -- most visible messages in the module. They should be short, but             --
    -- descriptive. Spaces are automatically escaped with  , so there is no  --
    -- need to add any &nsbp; values here.                                        --
    -- The user talk page.
    cfg['display-talk'] = 'talk'
    -- The user's contributions.
    cfg['display-contributions'] = 'contribs'
    -- The user's edit count, using the edit count tool on WMF Labs.
    cfg['display-count'] = 'count'
    -- Log of the user's page moves.
    cfg['display-moves'] = 'page moves'
    -- All the user's logged actions.
    cfg['display-logs'] = 'logs'
    -- Analysis of the user's (non-)automated contributions.
    cfg['display-autoedits'] = 'non-automated edits'
    -- The user's block log.
    cfg['display-blocklog'] = 'block log'
    -- Blocks that the user has performed.
    cfg['display-blocks'] = 'blocks'
    -- Link to the interface where the user can be blocked.
    cfg['display-blockuser'] = 'block user'
    -- CentralAuth, the global account manager for the user.
    cfg['display-centralauth'] = 'central auth'
    -- The user's deleted contributions.
    cfg['display-deletedcontributions'] = 'deleted contribs'
    -- Likn to email the user.
    cfg['display-email'] = 'email'
    -- Analysis of the user's edit summaries, using the tool on WMF Labs.
    cfg['display-editsummaries'] = 'edit summaries'
    -- Deletions that the user has performed.
    cfg['display-deletions'] = 'deletions'
    -- The user's entry on [[Special:ListUsers]].
    cfg['display-listuser'] = 'list user'
    -- A display of the user's global contributions, using the sulutil: interwiki
    -- prefix.
    cfg['display-sul'] = 'global contribs'
    -- All logs of actions performed on the user or their user page.
    cfg['display-targetlogs'] = 'target logs'
    -- Log of times the user has triggered the AbuseFilter (also known as the
    -- edit filter).
    cfg['display-abuselog'] = 'filter log'
    -- Page protections that the user has performed.
    cfg['display-protections'] = 'protections'
    -- Log of rights changes that the user has performed.
    cfg['display-rights'] = 'rights'
    -- Log of username changes that the user has performed.
    cfg['display-renames'] = 'renames'
    -- Link to a list of the user's requests for adminship.
    cfg['display-rfa'] = 'RfA'
    -- Data about the user from the MediaWiki Web API.
    cfg['display-api'] = 'api'
    -- List of the user's local file uploads.
    cfg['display-uploads'] = 'uploads'
    --                                  Page names                                --
    -- Page names used in formatting some of the user links.                      --
    -- The base page for a request for adminship link. This assumes that the link
    -- is of the format [[Base page/username]]. If your wiki uses a different
    -- format, consider adding a new link at [[Module:UserLinks/extra]], or you can
    -- leave a message at [[w:en:Template talk:User-multi]] to ask the module
    -- developers how best to deal with it.
    cfg['page-rfa'] = 'Wikipedia:Requests for adminship'
    --                                Error messages                              --
    -- The following are error messages that may occur when the module is run.    --
    -- These are the more common error messages that are localisable; other,      --
    -- rarer error messages may be raised from other modules or directly from     --
    -- Lua. The messages ending with "section" are the section names on a help    --
    -- page that give advice to users who encounter the error. The help page is   --
    -- defined in the 'error-config-message-help' message.                        --
    -- The module didn't detect a username from the "user" or "User" parameters.
    -- This could be because no username was specified, or because the user used a
    -- positional parameter and their username contains an equals sign,
    -- e.g. {{user|John=Smith}}, rather than {{user|1=John=Smith}}.
    cfg['error-nousername'] = 'no username detected'
    cfg['error-nousername-section'] = 'No username detected'
    -- The input to the "project" or "Project" arguments wasn't a valid interwiki
    -- prefix or a valid language code. $1 is the code that was input to the module.
    cfg['error-invalidproject'] = '"$1" is not a valid project or language code'
    cfg['error-invalidproject-section'] = 'Not a valid project or language code'
    -- The input to the "lang" or "Lang" arguments wasn't a valid interwiki
    -- prefix or a valid language code. $1 is the code that was input to the module.
    cfg['error-invalidlanguage'] = '"$1" is not a valid language code'
    cfg['error-invalidlanguage-section'] = 'Not a valid language code'
    -- The user didn't specify any link codes. This is only an error when using the
    -- "single" function to return a single link; the "main" function includes a
    -- user page link by default.
    cfg['error-nolinkcode'] = 'no link code specified'
    cfg['error-nolinkcode-section'] = 'No link code specified'
    -- The link code passed to the module was malformed. This means it was either
    -- not a string value or it was the blank string.
    cfg['error-malformedlinkcode'] = 'malformed link code detected'
    cfg['error-malformedlinkcode-section'] = 'Malformed link code detected'
    -- No link function exists for the code specified, so the module cannot make
    -- the link. $1 is the code that was passed to the module.
    cfg['error-invalidlinkcode'] = '"$1" is not a valid link code'
    cfg['error-invalidlinkcode-section'] = 'Not a valid link code'
    -- The snippets table was accessed, but there was no value for the key it was
    -- accessed with. This is not usually visible by end users; it is probably a
    -- mistake in one of the link functions in [[Module:UserLinks/extra]]. $1 is the
    -- key that was passed to the module.
    cfg['error-nosnippet'] = 'no snippet exists for the key "$1"'
    cfg['error-nosnippet-section'] = 'No snippet exists'
    --                             Error configuration                            --
    -- Configuration for the display of the error messages.                       --
    -- The error message used when a section link is available. $1 is the error
    -- message, and $2 is the name of the section.
    cfg['error-config-message-help'] = '[[Template:User-multi|User-multi]] error:'
    	.. ' $1 ([[Template:User-multi#$2|help]]).'
    -- The error message used when ano section link is available. $1 is the error
    -- message.
    cfg['error-config-message-nohelp'] = '[[Template:User-multi|User-multi]] error:'
    	.. ' $1.'
    -- The name of the error category. Pages are put in this category if any errors
    -- are encountered.
    cfg['error-config-category'] = 'UserLinks transclusions with errors'
    --                               Snippet defaults                             --
    -- Some of the snippets require default values when the user doesn't specify  --
    -- "project" or "lang" arguments. Those default values are stored here.       --
    -- The short project interwiki prefix.
    cfg['snippet-project-default'] = 'w'
    -- The long project interwiki prefix.
    cfg['snippet-projectlong-default'] = 'wikipedia'
    -- The MediaWiki language code for the wiki.
    cfg['snippet-lang-default'] = 'en'
    --                              Link table headers                            --
    -- The headers used in the table of links used on documentation pages.        -- 
    -- The link code.
    cfg['linktable-codeheader'] = 'Code'
    -- The link preview.
    cfg['linktable-previewheader'] = 'Preview'
    --                              End configuration                             --
    return cfg -- Don't edit this line.
    Cookies help us deliver our services. By using our services, you agree to our use of cookies.
    Cookies help us deliver our services. By using our services, you agree to our use of cookies.